Best Decorative Jewelry Box Hardware Box Latch

Box 2 Dec 2022 10+ Comments Open

1. Jewelry Antique Hinges Protectors Included

Jewelry Antique Hinges Protectors Included

Small woodworking projects, wood jewelry boxes, doll houses, small cabinets, drawers, and other smaller projects look retro because of the Antique bronze color. Antique lock latch hasp hinges handle box corner protectors kit includes 1PCS antique lock latch hasp 2PCS hinges and 8PCS box corner protectors. The material is made of alloy and vintage treatment processing. Refer to figure 2. It's suitable for small carpentry projects, and can be used for vintage wooden cases, jewelry boxes, gift boxes, wine boxes, toolbox, cabinets, etc. You can make a beautiful box for your lover with this set of accessories, and you can also repair the antique box in your home. You can make a beautiful box for your lover with this set of accessories, and you can also repair the antique box in your home.

Brand: Niannian

👤These look really nice. The price was great. Only two of them are functional. I am 98% sure that the little knobs will snap off if I try to force it. The hinges seem to be fine.

👤Nobody cares if there are no hinges included. The whole set is useless without them.

👤I love cigar boxes. They have colorful product labels, and they are made with wood. You can buy them at cigar shops, but they have terrible hardware. This kit addresses the problem. The hinges and clasps are better than the old ones. Adding a touch of "class" to your box is what they are also good looking at. The last thing that is great about this product is that you get enough for 20 boxes. This supply will last a long time no matter what I get.

👤I didn't pay attention to the detail of the legs. They are angels with something between their legs. I could not use them for the box I was making for a man.

👤I put this on my list because I was not ready to order it. It was not available at this time. I was going to make a Christmas gift for my hunny, but this is what I needed. There is a These are not cheap metal. Very strong. I expected the screws to be small. I will post a pic once I finish the project.

👤I spent $100 on a smoke box. There were screws that broke off in the box. Corner pieces that should be held in by 6 screws are only held on by 2. Not good. Not happy. Don't look good. The $100 box was ruined because if good screws are taken out there's holes, if successful and they don't break off before it comes out. This product ruined another product and was a gift for someone. Very sad.

👤I put the hasp on the box and it broke at the hasp hinge. These are nice, but they are not worth it if they break. The price point is low and they look nice, but the quality is not good.

👤These were put on my girls jewelry boxes. I did have some problems with the screws being weak and some of the heads breaking off, but they were helped dress them up with a fancy look. I would buy again, but probably find better screws.

👤It's perfect for my project handle, but I have bigger ones.

👤These are perfect for my project.

👤The piece was broken in the box.

👤Came without a handle or lock. There is a broken wing.

2. OZXNO Decorative Engraved Hardware Fittings

OZXNO Decorative Engraved Hardware Fittings

If you have a problem with the item, you can email them and they will fix it for you. Try not to. The package includes a decorative hasp latch and mini engraved hinges, which are easy to install. The latch buckle size is small. The mini hinge is 30 x 22mm and 1.18 x 0.86 inch. The surface is made of high-quality metal and covered with antique brass to make it resistant to rust. The box hasps and hinges kit can add antique features to your box. It's suitable for small woodworking projects, jewelry boxes, tool boxes, doll-houses, cabinet, drawers and other smaller items. It's suitable for small woodworking projects, jewelry boxes, tool boxes, doll-houses, cabinet, drawers and other smaller items.

Brand: Ozxno

👤I wouldn't buy these. The screws are not good. I threw the screws in the garbage. They were not tight.

👤It seems to be well made.

👤Sirvieron para el propsito.

👤It was very small and cheap to make. No good for anything.

3. GTHER 55x48mm Antique Vintage Cabinet

GTHER 55x48mm Antique Vintage Cabinet

2 Set x Latches; 12 x Screws are included. Great for vintage wooden box, wooden box, jewelry box, gift box, wine box, wedding card box, memorabilia box, toolbox, wooden furniture, drawer, cabinet, chests, etc. Your box will be different because of Antique coloring, exquisite pattern and beautiful shape. It is made of zinc alloy. It's easier to install reserved screw holes. The top half is 55x17mm/2.17x0.67in and the bottom half is 55x31mm/2.17x1.22in. 2 Set x Latches; 12 x Screws are included. 2 Set x Latches; 12 x Screws are included.

Brand: Gther

👤We have a coffee table in our house that is a big box with a split top that slides apart so you can put stuff in it, and a little boy that recently learned how to hold onto furniture. The sliding top on the table became a safety concern and I needed a way to secure it without making it look ugly or prohibiting me from accessing the inside. I put one of these on each side, so you have to open the box before I put one on the other side. My little guy doesn't have the coordination to unlatch them, so he can stand safely at the edge of the table, and they look so ornate that if you didn't know any better, you'd think the table came like that!

👤The hasps are used to make a latch. We use lightweight barn doors for our closet dressing room. Not strong, but rarely used. Looks nice.

👤The backing plate was very difficult to get straightened because it was thin and brittle.

👤I used it for decoration. I'm pretty sure how well they'd work trying to keep something closed. If they were to open and close a lot, I think they would break quickly. They are working well for my application.

👤Just as described. It's easy to install. I used them to make a box. The price is correct. I'll probably be buying more.

👤Exactly what I was looking for.

4. PGMJ Jewelry Decorative Hardware Cabinets

PGMJ Jewelry Decorative Hardware Cabinets

They were designed to be durable and pretty. Adding a bit of retro and elegant flavor to your home is possible by decorating your box with a unique retro exterior design. The zinc alloy is made of high quality zinc and is strong enough to hold up. Adequate matching screws can be very good with the box legs and wooden cases. The size is 1.18 x 0.95 inch. The color is Bronze. The packing includes 20 pieces of wooden case legs and 20 screws. The packing includes 20 pieces of wooden case legs and 20 screws.

Brand: Pgmj

👤They made my projects look more professional.

👤I wanted exactly what I got and it worked out perfectly.

👤These were perfect. We made a box for the ladies at the wedding.

👤The legs dress up my wooden boxes. It is beautiful.

👤These are perfect for box style albums that I make.

5. PGMJ Decorative Engraving Hardware Cabinets

PGMJ Decorative Engraving Hardware Cabinets

2 Set x Latches; 12 x Screws are included. Unique mini vintage bronze hollow-carved designs hinge, decorating your box, no only suitable for varies of wooden crates, wooden jewelry boxes, but also decorate your home any decoration, add a bit of retro and elegant flavor The zinc alloy is made of high quality zinc and is strong enough to hold up to weight. It is widely used for small carpentry projects, smaller jewelry boxes, doll rooms, smaller cabinets, drawers, and other smaller items. The size is 2.13 inch. The color is Bronze. 20 antique bronze hinges, 40 replacement screws, and a small plastic transparent box. 20 antique bronze hinges, 40 replacement screws, and a small plastic transparent box.

Brand: Pgmj

👤Medium quality arrived damaged. If you use two or more, you probably won't even notice the craft hinge is malfunctioning. The barrel of the hinge sits 1/16 of a degree proud of the surface. You will need a space for this. The entire batches arrived bent. The hinges are leaning away from the mounting surface on one side. It is asymmetrical and on a slant. It is possible to be bent into shape with pliers and padding, but that is not what you are paying for.

👤I wouldn't call it sheer. The hinges are made of metal. I made a box and attached them to it. It wanted to bend the box instead of the hinge. The box was made with heavy weight hardboard.

👤Not to mention very well made! They are perfect for small projects. A must have for any crafter.

👤I needed small hinges for a project and felt they needed to be functional. These worked well.

👤The hinges look nice. Sturdy. The gold is bright. They work well for my project.

👤Good quality and good size.

👤It serves as hinges on my gifts.

👤I am very happy with the product and the delivery from Amazon.

6. SDTC Tech Duckbilled Furniture Decoration

SDTC Tech Duckbilled Furniture Decoration

This is a small door. The size is 1.97"x1.69". Please make sure that the style and size of the latch is right for your boxes. The Retro Bronze Designed Toggle Latch and Padlock Kit is made of metal with antique brass plated. The cabinet duckbilled hasp latch total size is 59 x 39 x 2.32 inch and comes with matching screws for easy installation. The total size of the vintage lock is 32 x 22 x 1.26 inch and has a key. The antique lock and hasp catch will make your jewelry box look better. You can also make a beautiful retro box yourself, which is suitable for making retro hand crafts, repairing the antique wooden case, jewelry boxes, gift boxes, decorative cabinet etc. You can also make a beautiful retro box yourself, which is suitable for making retro hand crafts, repairing the antique wooden case, jewelry boxes, gift boxes, decorative cabinet etc.

Brand: Sdtc Tech

👤The brass is good, and the lock adds an antique touch. The latches are not antiques style. It's not the manufacturers fault, but being that the little padlocks are styled as antique, maybe they could have done something to make them look different than the ones on a Craftsman toolbox from 1995.

👤The package came with only six matching screws, which is not enough to install both of the latch-set that came in it. It will be difficult to find the "petina" coloring of the original screws. The latch and lock assembly were very nice.

👤I have put this product in many boxes. I highly recommend this part, it is made of high quality parts.

👤They are perfect for our family Christmas Eve box. The item was easy to install. Don't hesitate to buy again, definitely recommend.

👤What you see is what you get. I like it. If you lose the key, the locks are easy to break.

👤Just like the photo. Very happy with them.

👤My daughters treasure box was recycled into a wedding card box. The locks were large. It took me a few tries to install the screws.

👤You should drill your pilot holes. Unless you're attaching this to styrofoam, you'll have to drill your pilot holes or remove the screws if you attach by hand.

👤Very happy with the product.

7. Pieces Hinges Screws Storage Golden

Pieces Hinges Screws Storage Golden

Any quality problem can be replaced for free. There are 2 different sizes of the mini hinges, both of which are 2.5 x 2 cm. The design of the mini hinge has 4 mounting holes, and they prepare 4 pieces extra screws for you to replace, which can bring a lot of conveniences to the process. The material for mini hinges is made of iron, which is sturdy and not easy to break down, and the surface is covered with plating, which can prevent rust. They can be used multiple times for home and offices, as well as smaller cabinets, drawers, dolls houses, jewelry box or other general use. The 40 pieces 1.8 x 1.6 cm mini hinges connectors and 20 pieces 2.5 x 2 cm mini hinges connectors come with 300 pieces screws with a clear storage box, enough quantity for you to use. The 40 pieces 1.8 x 1.6 cm mini hinges connectors and 20 pieces 2.5 x 2 cm mini hinges connectors come with 300 pieces screws with a clear storage box, enough quantity for you to use.

Brand: Hicarer

👤Four screws broke using a watch screw driver, even after drilling pilot holes in wood, and very little force. The screws are made from scrap metal. Throw away all the junk. The hinges are loose, so you have to use two or three sets. For the price, I got less. The hinges are usable, but the screws are not. Two stars are generous.

👤The hinges are ok, but the screws are not. When I tried to screw them in, one of the heads snapped off. The wood is sturdy but not very hard, so I use it for collapsible walls on tiny dollhouses. I will have to find new screws to use the hinges I have left. I might have to glue them.

👤Everything hinges on what happens when you use these hinges. Two things become one.

👤The hinges were not damaged. The screws were not of good quality. Many heads snapped off during installation because they wouldn't accept a screwdriver. I suggest you buy some good quality screws from another source if you choose these screws.

👤I break the heads of screws. Pre drill holes are required. What do you think you'll get for that price? I wouldn't want to sell a box I made.

👤They are good for jewelry boxes. It was a challenge to handle the tiny screws. The solution is to use a nail first. Walla is right in. Good product, thanks.

👤These are lightweight hinges that can be used for jewelry boxes. The product description stated the correct measurements. All of it was exactly what I ordered and what I received.

👤I needed the hinges for the box I made. I am very happy with the results and the hinges and clasp all went together perfectly.

8. Antique Rectangle Matching Decorative Jewelry

Antique Rectangle Matching Decorative Jewelry

The size is 1.89" x 0.55" and the hole to hole distance is 1.53". The package included a mini Ingots hasp latch, 4 rectangular hinges, and 24 matching screws. Approx 26 X 29mm / X 18mm / 0.63 X 0.71 inch. The metal is made of high quality metal. The mini buckle and hinge are easy to install and can be used to decorate the wooden box. It's suitable for making retro hand crafts, small woodworking projects, wood jewelry boxes, doll houses, small cabinets, drawers, and other smaller projects. It's suitable for making retro hand crafts, small woodworking projects, wood jewelry boxes, doll houses, small cabinets, drawers, and other smaller projects.

Brand: Aifeier Et

👤The screws that came with the set were very good, but the latches were made of very thin metal. The hinges were so thin they were not able to hold the weight of the install. They looked nice.

👤Hasps are a good value.

👤I was confused on the size of the hardware, but it was worth buying.

9. Antique Bronze Hinges Decorative Jewelry

Antique Bronze Hinges Decorative Jewelry

It's suitable for small woodworking projects, jewelry boxes, tool boxes, doll-houses, cabinet, drawers and other smaller items. The package included a mini hasp latch, mini hinges, and mounting screws. The mini hasp is 27 X 30mm, and the length of mini hinges is 18mm, and the width is 16mm when fully unfolded. Anti-tust is not easy to fade, made of high quality metal. It's suitable for all kinds of jewelry boxes, cases, wooden boxes, jewelry box, gift box Doll house and etc. You can use the mini buckles to make your own artwork, such as making belts, luggage belts, backpacks, harnesses and clothes. You can use the mini buckles to make your own artwork, such as making belts, luggage belts, backpacks, harnesses and clothes.

Brand: Aifeier Et

👤We are the right size for me to make a hidden compartment behind a cork board map for a birthday escape room. I liked that it came with screws and the size dimensions were accurate.

👤The item was damaged. One of the latches had a broken spring. The latches are not as strong as I had expected. It didn't work for what I wanted.

👤I needed the hinges and clasp to complete the project. The price was reasonable and they were delivered fast.

👤I was very disappointed how small they were.

👤I built a great tip box.

10. Cyful Vintage Closure Furniture Jewelry

Cyful Vintage Closure Furniture Jewelry

You can also make a beautiful retro box yourself, which is suitable for making retro hand crafts, repairing the antique wooden case, jewelry boxes, gift boxes, decorative cabinet etc. 5 Bronze Tone Box Latch Hasps with mounting screws. The overall size is 33 x 29 x 8mm/1.3" x 1.1" x 0.3" Vintage boxlatch lock is great for vintage wooden box, heavy duty wooden box, jewelry box, gift box, wine box, toolbox and many more. The Right Latch Hook is made of zinc alloy, strong and resistant to rust, and will not slip open. They will offer a 100% money back guarantee if you don't love their products as they do, so just try their products and let them know if you don't love them. They will offer a 100% money back guarantee if you don't love their products as they do, so just try their products and let them know if you don't love them.

Brand: Biaungdo

👤5 pc retro vintage bronze tone clasps. The metal in the photos is stamped sheet metal, which is not what the description says. They are hollow and have rough edges. The swing arm latch feels terrible since it is hollow. It will not work with my leather products. Buying solid cast latches.

👤I could only give this an average rating, these are hollow, so they're sharp underneath, and can be hard to align, because of the pressure on the screw. They arrived quickly and I needed them fast. I wouldn't buy them again.

👤I ordered this to hold a small door in my truck. The plastic latch broke. Couldn't buy the lock. The entire assembly would have cost over $100 from the Ford dealer. It was installed in about 10 minutes. Looks fine!

👤These are pressed-shape metal that are light duty. They offer good value because of their low cost. I put them on a wood chest that was twice as tall as a cigar box. They work well and look great.

👤I thought this would be a well-made item, even coming out of China. I received my order and was very disappointed. Some of the screw holes don't have holes, and some of the pieces have flashing that was not ground off. I thought this would be a good deal, but I will not buy them again.

👤The metal is stamped. The lever moves rough. It is likely to bend easily. Light weight and hallow. Into the trash can. It's worth about the buck. A bad fit wooden box is perfect for a junkie.

👤I wanted to add clasps to some wooden boxes I had purchased. If they had all been usable, I would have given them 5 stars. I did not need all of them. For a small, lightweight box, these are perfect.

👤I was not happy with these. These are made from a thin metal and are hollow. The hook clasp is very tight and difficult to move, but I think it will loosen as it wears down. I don't think they will last very long if they are getting regular use.

11. RAYNAG Butterfly Jewelry Suitcase Cabinet

RAYNAG Butterfly Jewelry Suitcase Cabinet

There are three edges and a height of 2.7 cm. The set of latches are beautiful. Have a nice look. It's easy to install. A classy clasp for small boxes. Great little things. These will add a finishing touch to the detail. It's great for wood projects, small boxes, and homemade card boxes. You can put a lock on it. This is a small door. The size is 1.97"x1.69". Please make sure that the style and size of the latch is right for your boxes. This is a small door. The size is 1.97"x1.69". Please make sure that the style and size of the latch is right for your boxes.

Brand: Raynag

👤The tiny latch on my wall mounted jewelry armoire is very secure. I'm preparing my home for market to a smaller size and feel safer with the butterfly latch on my jewelry.

👤It was used on a small box. Nive brass. Feet, corner protectors and a handle were added. It turned out great.

👤The design is beautiful. Not strong enough to break a jewelry box.

👤There are only 10 screws in the package.

👤The latch fit perfectly and seems sturdy, it broke on my recipe box.

👤I made a music box for my daughter.

👤These are cute for our daughter's treasure box, but it was a mission to align. It's not obvious that it's not aligned perfectly. It serves its purpose.

👤One side of the hasp was broken. I can't use it.

Summary

What is the best product for decorative jewelry box hardware box latch?

Decorative jewelry box hardware box latch products from Niannian. In this article about decorative jewelry box hardware box latch you can see why people choose the product. Ozxno and Gther are also good brands to look for when you are finding decorative jewelry box hardware box latch.

What are the best brands for decorative jewelry box hardware box latch?

Niannian, Ozxno and Gther are some of the best brands that chosen by people for decorative jewelry box hardware box latch. Find the detail in this article. Pgmj, Pgmj and Sdtc Tech are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com