The hammered surface shows a true artisan hammered added touch. Antique nails. Craft was forged in the USA. Craft was forged in the USA.
👤The charactor can be given to furniture with little nails. It was used on my coffee table.
👤These are used in ceramic sculptures. They were fired in an electric kiln. I will be ordering more.
There is an application. You can use these brass upholstery tacks to make decorations on furniture, or you can use them to fix things. The nailheads are 1 in diameter and have a 1 1/2 inch shank. They are the same nailheads they have been selling to the commercial furniture industry for years. These decorative nails are great for adding beauty to any piece of furniture that needs updating or just needs a little extra character. The nails are made from high quality steel and have a strong nail. It means less time spent pulling out bent nails. The less expensive nailheads are prone to bending when being installed, which results in frustration and lost time. Installation can be done by using a hammer and a set of needle nose pliers. Follow the directions given by the tool if you use a nail spacer tool. If you use the needle nose pliers, hammer the tack into the wooden surface with the nail portion of the tack in place. These nails can be used on a lot of different furniture and craft projects. They are great note holders at home. These nails can be used on a lot of different furniture and craft projects. They are great note holders at home.
👤The final touch for my shutters. The nail should be on the head. I ruined a couple of them. My fault is not the clavos.
👤These are large faux rivet/bolt-head pins. I pre-drill the holes with a 1/66" bit. The pins added realism to the bed.
👤This is great. I used them as ceiling tacs. I was able to use a hammer on them.
👤Very nice! It looks pretty and is very durable.
👤These are gorgeous. When you put the shift in, bend the tac sideways. If you drill a pilot hole first half way down, you'll be good to go. It seems to stop it from shifting.
👤My husband made a door out of them.
👤I like the size of these but you need to be careful because they will bend if you rough them up. I drill a small hole.
👤I used these in my shutters. I really like them! They remind me of a big tack. I had to tap them in slow because the pin would bend if I did not.
👤I used them to make plain bifold doors look better. The mix of weight, age and elegance I was looking for was all given to me by the company.
These nails can be used on a lot of different furniture and craft projects. They are great note holders at home. The decorative nails are made from cast iron and have a black finish. It is ideal for decorating doors, cabinets and other furniture items, but can be used for a variety of purposes. The nails have a natural black finish that is virtually maintenance free and is permanent. The dimensions are 1 inch x 1 inch. Simply drill a small pilot hole and then tap in with a rubber mallet. Simply drill a small pilot hole and then tap in with a rubber mallet.
👤I used iron buttons to cover the screws that were used to attach my stained cedar shutters. I used four at the bottom and four at the top of the shutter. It hides the silver screw and creates a very finished look to the shutter. Win! To get it as close to the screw head as possible, I tapped a nail hole next to the screw head. I made a hole with the nail and used a rubber mallet to tap it into it. If you don't put the cover up next to the screw head, it won't cover adequately.
👤Everyone should be happy with the look of the heads. There is a The heads are welded onto a nail. The nails are not always centered. Installation of them in straight lines is a challenge as some may end up off the planned location because of the non-centricity. I hammered them in with a plastic head hammer after installing them. The welds did not break as I had feared, as the last few taps had to bend the heads to the shaft of the nail.
👤I was expecting a brittle or easy to bend nail. I got a nail that could be used as a fastening and not just for decoration. The finish was exactly what I needed and the quality of the metal was above expectation. Pay attention to the sizes you want so as to avoid issues. I have no concerns about my items matching the indicated measurements. Definitely recommended.
👤These were a great addition to my barn door. I put a piece of scrap wood over the nail head before hammering it in. I wanted the door to look like it had been restored. The clavos nails were forged by hand.
👤I was surprised by how heavy these were. 12 for $13 was a steal. My husband was able to gently tap them into place because they were sturdy metal.
👤Exactly what I was looking for to finish my cedar shutter project. The cedar boards have four inches of nails on them. The nails were ordered for a smaller box.
👤I like these because they are strong. The size is correct. First drill a small hole. These are not cheap and you can bend the stem like a cheap nail. The hold will not be affected by a small pilot hole. They are not cheap, but I may buy again. The spike stem is different from the nail stem in that the set looks like this. To stay in the hobby lobby, you have to drill a large hole and use caulking.
👤The cast iron clavos are very nice. We were able to use them for our gates even though they didn't measure 1 in diameter. The clavos came in time for my contractor to finish the gates that morning. The quality was not what we were expecting. I put them next to a ruler as well as next to the ones we had but not enough for the job.
50PCS Round Large-headed Nail is included in the package. The round clavos are perfect for any door or gate. The outer rim is flat and helps seal out unwanted and damaging moisture. They are made of thick solid steel with a black powder coat finish. These gems have a "lightly hammered" look that gives them a real weathered nail head appearance. The nail stems are centered to allow perfect layout. The nail stem is about a quarter of an inch thick and the head is about one inch in diameter. The nail stem is about a quarter of an inch thick and the head is about one inch in diameter.
👤I ordered a box of 50 because I have shutters with 12 clavos. When I hang them this spring, I will drill holes in them and cover the heads with clavos. Before you tap in the clavos, make sure toRILL your holes. They will break if you try to nail them straight into the wood.
👤I loved these clavos. I was looking for this to add some finishing touches to the console table my husband built for me. They are not an actual building material, so don't expect them to hold anything together, but they are perfect as a decorative item. If the wood you're using is too hard, these may not sit where you want them to. I used a cloth over them so as not to scratch them with the hammer, as I lost a few to bending as I hammered them in.
👤Great look! They were perfect for our shutters. They gave us the look we wanted. Several of the nail portions broke when hammering into cedar.
👤I used these to add a rustic finish to my barn door. Not as strong as I would have liked. A few broke on the installation. I'm not sure if I'm using them for what they were designed for. Would buy again.
👤The clavos were supposed to be used to decorate the face of the head board. Oak is the wood of choice. I drilled small holes to allow them to penetrate the wood. The nail head was bent in the first attempt. The second attempt resulted in the clavos breaking off and leaving a nail head in my bed. The clavos were damaged when Whine tried to remove them. I can no longer use a product like this because the nail head won't come out. I need to be paid for the clavos.
👤The old world look is amazing. Beautiful! Looks like it was hand tooled.
👤The product is very heavy duty and looks great on faux wood beams.
👤I wish they had strongbarn style ribs so they would stay in the wood.
Simply drill a small pilot hole and then tap in with a rubber mallet. The decorative nails are made from iron and have a black finish. It is ideal for decorating doors, cabinets and other furniture items. The nails were forged with iron. The dimensions are dia. x Lengh: 1 Simply drill a small pilot hole and then tap in with a rubber mallet. Simply drill a small pilot hole and then tap in with a rubber mallet.
👤I have used and ordered many of theseclavos. All of the different types of clavos that I have ordered from A29 have been great. I use these rounds the most because they are the most cost effective and are a perfect size. They lend that authentic rustic look, vs the cookie cutter styles of most of the others. The result is amazing. I use a drill bit to start a pilot hole, then use a mallet to drive them in. If you want a real rustic look on your furniture, shutters, doors, etc., these are the ones for you.
👤I didn't use it as intended. There was no time to fix my fence gates. There is a I will have to rate them again after using them. There is a I am afraid that the coding will flow with the rain. There is a Let's wait.
👤We made a window treatment for our daughter. The nails added a cute touch. Very strong. They had a very rustic touch because of the pitted texture.
👤These nails are large. I keep thinking of uses for them, so I bought more. Everyone in my home wants to know where I got them. Thanks a lot.
👤These are sturdy and thick. I was afraid that they were not cheap, since pictures don't do justice. I am very happy with the purchase.
👤These will make your projects look expensive. I recommend pre-drilling holes to make installation easier and covering the head to prevent scarring when using hardwood. A leather scrap works well.
👤The quality of the iron nails is very good. They are very well made and have the right balance of being consistent enough to make installing multiple nails easy, while still retaining their unique, hand-forged look. There is no splitting when you drill a small pilot hole. We used the nails to accent the cover we made. The product is great.
👤These look very rustic. They were delivered quickly. I plan on using them to add a touch of class to the coffee table top. I would make a hole in the ground. I will get more.
👤Gutet qualit. Gutes Preis-Leistungsverhltnis.
Simply drill a small pilot hole and then tap in with a rubber mallet. There is a package of 24 clavos. The zinc clavos will not rust like iron clavos. The nails are centered to help achieve the desired layout. The coat has a black finish. The irregular shape of these clavos makes them look more rustic. The hammered surface shows a true artisan hammered added touch. The hammered surface shows a true artisan hammered added touch.
👤Absolutely made the door! These were easy to install. I used a ruvber mallot, but you don't have to worry about marring them as you hammer. I looked like a pro. Couldn't be happier. When people ask what they are, you can tell them about the use of elephants in some countries. They try to open the door with their heads. The elephants can't get into the house because of these. I can say that they do work. I have never had an elephant get into the guest part of my house. My mother in law is one of the stories.
👤These seem to be of good quality. I believe that the pricing is fair and have shopped for hardware like this before.
👤It was easy to install. I used a drill bit. The caulking was put on the tip of the nail. The door looks great.
👤The clavos are great. This is my second order.
👤Good product. Make sure you drill a pilot hole. It was almost broken trying to force it through the wood.
The tacks are thick and long. Don't be fooled by the clavos with thin needle-like nails. The zinc alloy head is great for outdoor use. The head is 1 1/2 inches in diameter and has a black powder coat finish. The duller black finish is good for getting the look you want. The head protrudes. Strikingly, it was 5/16". The clavos were designed to please. The center of the nail stem helps you lay out a pattern. These pieces are aged or vintage looking because of the distressed worn out hammered look. These pieces are aged or vintage looking because of the distressed worn out hammered look.
👤These are the sizes I was looking for. It is hard to find these with a thin nail head like this, and it takes a long time for it to penetrate through the back of what you are trying to decorate. I broke three of them trying to get them too flush with the rubber mallet. I would buy them again even though they are a little expensive.
👤My brother built my gate frames. The gates were given a nice finishing touch by the clavos. I tapped the pilot holes with a rubber mallet after marking and drilling them. The company is great to deal with. The heads are heavy. The company sent me replacements for some of the clavos heads that were detached from the nails. I will always check with this company first for my hardware needs.
👤The piece is great. We used them to add interest. We didn't want to hit them into the boards so we drilled a small pin hole. Looks great. The finish is black.
👤They look great! The 1.5 inch size is worth the extra cost over the 1 inch size. Always get at least 3 extra clavos. I got the exact amount and on two of my 48, the head and nail separated when hit with the hammer at an off angle. They were $2-$2.50 each, so they were highly recommend.
👤They are the perfect size for our pantry door. I used a cloth to cover the starter holes I drilled so I wouldn't get hurt installing them. They went in without a problem. I might not have needed the predrilling. Just to be sure, I was happy that I did. The pantry door looks great.
👤They give an old school look to whatever you use them for.
👤Excellent length of nail, as described. Quick delivery.
👤I put these on my upper fence and it looks great.
Simply drill a small pilot hole and then tap in with a rubber mallet. The material is high quality iron and bronze. Sturdy and durable. Length: 1” These brass-colored upholstery tacks are great for decorating furniture or wood frame and make your home more special. It requires proper tools like Needle nose pliers and tack hammers to install them. Not using pliers will cause bending. Don't use your fingers to hold them. 50PCS Round Large-headed Nail is included in the package. 50PCS Round Large-headed Nail is included in the package.
👤These Nailheads were ordered in 4 batches. The first order was for a single batches of 50 which were all described by the seller. My second order was different. Most of the nailheads were damaged, miscolored or irregular in size. Although they may have been used in an upholstery project, my project required them to be lined up in a 40x50 framing project and their irregularity was noticible. The irregulars in my order of 150 nailheads were the reason the seller tried to mix them. I would never order from this seller again.
👤The size of the upholstery tacks was perfect. I was happy to find them on Amazon. Needed them quickly and received them the day I needed them.
👤I like how these look. They were used to decorate some window boxes. I had a few of them, but for the most part they worked well. I had to slow down and keep it straight, but I still had about 100 bend. Not bad.
👤The first set I ordered was described. These were great. You can get more small ones for half the price if you try 2 more times. They are misleading with the product and won't bother trying to order them again.
👤The pin was on the hammer. Same issue, tried a second one. The pins are soft and the point is not sharp. Returned them.
👤The tacks are well built and finished. Our leather couch is perfect for this match.
👤These were used for shutters. Very nice! Put them in with a hammer. I put tape on top to keep the paint from being destroyed.
👤I like the nails. I needed 48 but got 45. I would like to get my other five. I made shutters and used nails to upgrade them.
These pieces are aged or vintage looking because of the distressed worn out hammered look. The decorative nails are made from iron and have a black finish. It is ideal for decorating doors, cabinets and other furniture items. The Square Pyramid head is forged from iron. The dimensions are as follows: width: 1; height: 1; length: 1 Simply drill a small pilot hole and then tap in with a rubber mallet. Simply drill a small pilot hole and then tap in with a rubber mallet.
👤These were put to a table to hide screws. They worked well. It was necessary to drill first to avoid splitting the wood. Drilled and tapped them.
👤Everything we wanted. It was perfect for what we were building. The product made our desk and bookshelf better. It looks amazing. I will purchase again in the future, it would be my 4th time.
👤The front door was boring. It was dressed up with a door and square nailheads. My door is beautiful now.
👤Our new shutters look great.
👤It worked well to make a barn door look better.
👤Heavy duty love them because of their rustic design.
👤Product was used for a mantel.
👤The product is great and was ordered more for other projects.
The nail stem is about a quarter of an inch thick and the head is about one inch in diameter. There is a pack of 25 pieces. It's 1 1/2 inch dia. The zinc alloy head will not rust like iron clavos. The oil rubbed bronze plated finish is beautiful. Predrilling the desired patterns is what the nails are centered for. Has a hammered look. The tacks are thick and long. Don't be fooled by the clavos with thin needle-like nails. The tacks are thick and long. Don't be fooled by the clavos with thin needle-like nails.
👤The clavos were what I was looking for. They look great and are excellent quality. They are the perfect finishing touch. The wild west hardware company is great to work with. They went above and beyond to meet my needs when I needed replacements. I didn't know that my replacements were waiting for me in my mailbox. I am very pleased and very happy. I will definitely return if I ever need more calvos. Thank you so much Wild West!
👤I love these! These should be put on our exterior shutters to make them look more rustic. People always comment on how great the shutters look.
👤Pre-drill holes are needed for an easy install. Put a rubber mallet in the hole. Great look!
👤The rivet head was not on all of them. 2 more came off quickly. I made a gate out of them. Get what you pay for. Still did the job.
👤Very disappointed. I bought 2 boxes for a project. Its head was coming off. Not strong. Won't recommend.
👤I replaced the older hand made ones.
👤It adds a touch of class to my project.
👤It's perfect for an addition to our shutters.
Decorative nails 1 products from Old Nail Source. In this article about decorative nails 1 you can see why people choose the product. Comfortstyle and A29 are also good brands to look for when you are finding decorative nails 1.
Old Nail Source, Comfortstyle and A29 are some of the best brands that chosen by people for decorative nails 1. Find the detail in this article.